AUDIO-TECHNICA AT-LPW40WN TURNTABLE
The Audio-Technica AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (Medium Density Fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.
The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Product Features:
- Walnut effect wood veneer finish
- Connect directly to speakers at home with the built-in phono preamplifier
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- AT-HS4 headshell and AT-VM95E Dual Moving Magnet phono cartridge
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- Straight carbon-fiber tonearm with hydraulically damped lift control
Product Specifications:
- Type: 2-speed, fully manual operation
- Motor: DC servo motor w/speed stability control
- Drive Method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminum
- Wow and Flutter: < 0.15% (WTD) @ 3 kHz (JIS)
- Signal-to-Noise Ratio: >60dB
- Phono Output Level: 4 mV nominal at 1 kHz, 5 cm/sec
- Line Level Output: 200 mV nominal at 1 kHz, 5 cm/sec
- Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
- Power Supply Requirements: 100-240V AC, 50/60 Hz
- Power Consumption: 1 W
- Dimensions (WxHxD): 420 x 116.9 x 340 mm
- Weight: 4.72kg
- Accessories Included: AT-VM95E phono cartridge; AT-HS4 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; rubber mat; dust cover; 45 RPM adapter
- Tonearm type: Balanced straight tonearm with detachable headshell
- Effective arm length: 223.6mm
- Overhang: 18.6mm
- Tracking error angle: <2 degrees
- Applicable cartridge weight: 12-17g
- Anti-skating range: 0-3g
- Replacement Stylus: AT-VMN95E